Finding Ways To Keep Up With
Whether you employ your garage solely for automobile storage or as a workshop, it is significant to defend the concrete flooring from deterioration. If left unprotected, garage flooring can quickly decompose from things like oil and chemical spills, tire imprints, and general wear and tear. One of the finest approaches to shield and beautify a garage floor is with an epoxy or polyaspartic protective layer.
Garage Force is a well-known producer that develops high-quality protective layers specially designed for garage flooring. After examining dozens of Garage Force reviews online, a few items stood out as top performers for protecting and improving the look of any garage flooring:
The Garage Force Epoxy Protective Coating Kit is a two-component 100% solid epoxy system that offers a durable, chemical-resistant, and aesthetically-pleasing finish. The low-odor epoxy dries rapidly to form a hard, glossy surface that withstands stains, abrasions, and impacts. It’s suitable for both residential and commercial uses. Installation is simple with the kit’s step-by-step instructions.
For faster-drying protection, consider the Garage Force Polyaspartic Protective Layer. This single-component covering cures within 2-4 hours, allowing you to employ your garage sooner than with traditional epoxy. It also provides superior UV resistance and color retention compared to other polyaspartic protective layers on the market. The non-yellowing formula maintains a bright, glossy look for years.
Whichever protective layer you opt for, proper surface preparation is key for long-lasting outcomes. Sweep and vacuum to remove all loose debris. Then etch or grind the concrete to generate texture for better adhesion. This is particularly significant for older flooring with existing protective layers or sealants. After etching, thoroughly clean the floor to remove all residue and allow it to fully dry before application.
For application, both the Garage Force epoxy and polyaspartic protective layers come with detailed instructions. Generally, you’ll want to pour the resin component onto the floor in ribbons and spread it evenly with a notched squeegee. Back-roll the material with a non-shedding roller to work it into all the pores and crevices of the concrete.
Be sure to apply the Garage Force garage floor coating within the appropriate temperature range, usually between 50-90F. Too cold or hot and it won’t cure properly. Also work in sections you can coat within the pot life window before material starts to set up. An extra set of hands makes application go much smoother. Allow full cures times of 12-24 hours before moving vehicles or equipment back in.
With the right Garage Force garage floor coating on your floor, you’ll enjoy a glossy, stain-resistant surface that’s easy to clean. No more unsightly oil spots or tire imprints marring the concrete. The non-slip texture provides traction too. Periodic sweeping is usually all that’s needed to maintain the like-new look for many years. Recoat only when the protective coating wears thin rather than stripping and starting over.
This post topic: Advertising & Marketing